The Various Components Of The Blood-Pressure Monitor; Inserting The Batteries - Microlife BP 3BM1-3P Instruction Manual

3.

The various components of the blood-pressure monitor

The illustration shows the blood-pressure monitor, BP 3BM1-3P consisting of:
a) Main unit:
Cuff connection
b) Upper arm cuff:
Medium cuff (AC-1 M) for arm circumference 22-32 cm
4. Using your blood pressure Monitor

4.1. Inserting the batteries

Insert batteries immediately after unpacking the unit. Battery compartment is located on the back of the
device (see illustration).
a) Remove cover as illustrated
b) Insert the batteries (4 x size AA 1,5 V), thereby
observing the indicated polarity.
c) If the battery warning
batteries are almost flat and must be replaced. After
battery warning
work until batteries have been replaced.
Attention!
• Please use «AA» Long-Life or Alkaline 1.5V Batteries. The use of 1.2V
Accumulators is not recommended.
• If the blood-pressure monitor is left unused for long periods, please
remove the batteries from the device.
Functional check: Press «Memory» button down to test all the display symbols. When functioning
correctly all symbols must appear.
«Time»- button
Mains adapter
power socket
appears in the display, the
appears, the device will not
«O/I»- button
LCD-display
«Memory»- button
19