Troubleshooting; Error & Status Messages On The Control Panel - Ricoh Printer Quick Installation Manual

Troubleshooting

Error & Status Messages on the Control
Panel
This section explains what the messages that appear on the control panel mean
and what to do when a particular message appears.
❖ Messages (in alphabetical order)
Messages
Add Toner
Black
Add Toner
Cyan
Add Toner
Magenta
Add Toner
Yellow
Add Toner
XXX/XXX
Calibrating...
Call Service: EC
Power Off On
/ Call Service if
error reoccurs
Cannot check
Signal in Ad hoc
G1398504_1.00
Description
The printer is out of toner
(Black).
The printer is out of toner (Cy-
an).
The printer is out of toner (Ma-
genta).
The printer is out of toner (Yel-
low).
The printer is out of the indicat-
ed toner(s).
XXX: Yellow/Magenta/Cy-
an/Black
The printer is calibrating the
color.
A communication error sent
from the engine to the control-
ler.
An attempt to check the radio
signal was made while the
communication mode was set
to [Ad hoc] in the interface set-
tings.
Recommended Action
Replace the toner cartridge
(Black).
See p.28 "Replacing the Ton-
er Cartridge".
Replace the toner cartridge
(Cyan).
See p.28 "Replacing the Ton-
er Cartridge".
Replace the toner cartridge
(Magenta).
See p.28 "Replacing the Ton-
er Cartridge".
Replace the toner cartridge
(Yellow).
See p.28 "Replacing the Ton-
er Cartridge".
Replace the toner cartridge of
the indicated color(s).
See p.28 "Replacing the Ton-
er Cartridge".
Wait a while.
A communication error sent
from the engine to the control-
ler.
To check the radio signal , se-
lect Infrastructure in the com-
munication mode settings.
Copyright © 2005
74