Ricoh Printer Quick Installation Manual page 468

Monitoring and Configuring the Printer
Message
Printer <printer name> has no queue
pserver start. (NetWare)
Required computer name (<Computer name>)
is duplicated name
Required file server (<file server name>) not
found
restarted.
sap enable, saptype=<SAP type>, sap-
name=<SAP name>
session <community name> already defined.
session_ipx <community name> not defined.
Set context to <NDS context name>
shutdown signal received. network service re-
booting...
smbd start. (NetBEUI)
SMTPC: failed to get smtp server ip-address.
SMTPC: failed to connect smtp server. time-
out.
Problem and solutions
(In the print server mode) The print queue is
not assigned to the printer. Using NWadmin,
assign the print queue to the printer, and then
restart it.
(In the print server mode) The NetWare serv-
ice has started.
The start job found the computer name by add-
ing the computer name to the suffix (0,1...). Set
a new computer name that is unique.
The required file server is not found.
The lpd service has started.
The SAP function has started. The SAP packet
is issued to advertise the service on the SAP
table on the NetWare server.
The requested community name is not de-
fined.
The requested community name is not de-
fined.
An NDS context name has been set.
The network service is rebooting.
The smbd service has started.
The SMTP server IP address could not be ob-
tained. This could be because:
• The specified DNS server could not be
found.
• No connection to the network has been es-
tablished.
• The specified DNS server could not be
found.
• An incorrect DNS server is specified.
• The specified SMTP server IP address
could not be found in the DNS server.
Connection to the SMTP server failed due to
timeout. This could be because:
• The specified SMTP server name is incor-
rect.
• No connection to the network has been es-
tablished.
• The network configuration is incorrect, so
there is no response from the SMTP serv-
er.
228