Host Interface Menu; Changing The Host Interface Menu; Host Interface Menu Parameters - Ricoh Printer Quick Installation Manual

Making Printer Settings Using the Control Panel

Host Interface Menu

You can set configurations about network connections and communication when
using parallel connection between the printer and the computer. The changed
configuration holds even if the printer is turned off.

Changing the Host Interface menu

Follow the procedure below to change the I/O Timeout.
A
Press the {Menu} key.
The [Menu] screen appears.
B
Press the {U} or {T} key to display [Host Interface], and then press the {#
Enter} key.
C
Press the {U} or {T} key to display [I/O Timeout], and then press the {#
Enter} key.
D
Press the {U} or {T} key to select the lead time needed to end a printing
operation, and then press the {# Enter} key.
Wait for two seconds. The [Host Interface] menu appears.
E
Press the {Online} key.
The initial screen appears.

Host Interface menu parameters

This section explains parameters that can be set on the Host Interface menu.
❖ I/O Buffer
You can select the size of I/O Buffer. Normally it is not necessary to change
this setting.
• 128 KB
145