Configuration; Ethernet Configuration - Ricoh Printer Quick Installation Manual

Configuration

Ethernet Configuration

Make the following network settings according to the network interface you are
using.
You can use SmartDeviceMonitor for Admin or a Web browser to make IP ad-
dress-related settings in a TCP/IP-capable environment.
❒ Configure the printer for the network using the control panel.
❒ The following table shows the control panel settings and their default values.
These items appear in the [Host Interface] menu.
Setting Name
DHCP
IP Address
Subnet Mask
Gateway Address
Frame Type (NW)
Active Protocol
Ethernet Speed
LAN Type
❒ If DHCP is in use, the IP address, subnet mask, and gateway address are all
set automatically.
❒ Make this setting only when it is necessary. See Software Guide.
A
Press the {Menu} key.
G1398502_1.00
Value
On
011.022.033.044
000.000.000.000
000.000.000.000
Auto Select
TCP/IP Active
NetWare Active
SMB Active
Apple-
Active
Talk
Auto Select
Ethernet
90
Copyright © 2005