Special Operations Under Windows; Printing Files Directly From Windows; Setup; Using A Host Name Instead Of An Ip Address - Ricoh Printer Quick Installation Manual

Special Operations under Windows

Printing Files Directly from Windows

You can print files directly using Windows commands. For example, you can
print PostScript files for PostScript 3.
❖ Windows 95/98/Me
You can print files directly using "ftp" command.
❖ Windows 2000/XP, Windows Server 2003, Windows NT 4.0
You can print files directly using "lpr", "rcp" or "ftp" command.

Setup

Follow the procedure below to make network environment settings.
A
Enable TCP/IP with the control panel, and then set up the printer's net-
work environment about TCP/IP including IP addresses.
TCP/IP of the printer is set as default.
B
Install a TCP/IP in Windows to set up the network environment.
Consult the network administrator for the local setting information.
C
To print under Windows 2000/XP, Windows Server 2003, or Windows NT
4.0, install "Printing service for UNIX" as the network application. To
print under Windows NT 4.0, install "Microsoft TCP/IP printing" as the
network application.
For details about setting up IP address, see Setup Guide.
For details about setting the IP address of the printer using DHCP, see
p.279 "Using DHCP".
This completes the setup for specifying a printer using an IP address when
printing. When using a host name to specify a printer, proceed to

"Using a Host Name Instead of an IP Address"

Using a Host Name Instead of an IP Address
When a host name is defined, you can specify a printer by host name instead of
IP address. The host names vary depending on the network environment.
When using DNS
Use the host name set to the data file on the DNS server.
G1398505_1.00
and continue the setup.
Copyright © 2005
p.245
245