Ricoh Printer Quick Installation Manual page 15

Paper and Other Media
Printer driver setup
Enabled paper feeding tray Bypass Tray
Number of sheets that can
be set
Both-sided printing
Additional cautions
Glossy Paper
Printer setup
Printer driver setup
Enabled paper feeding tray Bypass Tray: 50
Both-sided printing
Additional cautions
Envelopes
Printer setup
Printer driver setup
Enabled paper feeding tray Bypass Tray: 10
Both-sided printing
Click [Transparency] in the [Type:] list.
Bypass Tray: 50
❒ Make sure paper is not stacked higher than the paper guides
inside the bypass tray.
Not possible
• Print speed for OHP transparencies is slower than for plain pa-
per.
• Due to switching modes, the machine will be on standby for
thirty or forty seconds after the job was received.
• We recommend that you use a 4000 ANSI lumen or brighter
overhead projector to project OHP transparencies.
Press [Paper Input] menu, [Paper Type], and then [Glossy Paper] on
the control panel.
Click [Glossy] in the [Type:] list.
❒ Make sure paper is not stacked higher than the paper guides
inside the bypass tray.
Not possible
Print speed is slightly slower compared to plain paper.
Press [Paper Input] menu, [Paper Type], and then [Thick Paper 1] or
[Thick Paper 2] on the control panel.
Click [Thick1] or [Thick2]in the [Type:] list.
❒ Make sure paper is not stacked higher than the paper guides
inside the bypass tray.
Not possible
11