Wifi-Settings; Net Search; Wifi Config - UTStarcom F1000G Manual

Menu

4.5 WiFi-Settings

WiFi-Settings
From this submenu, you can perform the following WiFi settings
Note: After completing WiFi settings, switch off the phone and then
switch it on, in order that the changed WiFi settings can take effect

4.5.1 Net Search

WiFi-Settings Net Search
This option enables you to search available APs (10 maximum) for the
phone. After selecting this option, the phone will start to search for APs.
Available APs will be listed according to the signal strength. The strongest
AP's SSID will be highlighted at the top of the list
Press to highlight the desired SSID, and press the left soft key
(Save). Press
the left soft key (Save) to save the SSID to the connection profile. You can
then follow the prompt to set the WEP key. After the WEP key setting, the
phone will start the connection to the AP. If the connection fails, the phone
will connect to other APs specified in "SSID & WEP KEY". If the phone
fails to connect to all these APs and the Auto Scan function is active, the
phone will try to search and connect to another available AP
Note: When the phone is connecting to an AP, you can press the
right soft key

4.5.2 WiFi Config

WiFi-Settings WiFi Config
From this option, you can perform the following WiFi configuration:
52
to highlight the desired connection profile, and press
(Search) to start the search for available APs