Wifi Config - UTStarcom F1000 User Manual

4.5.3 WiFi Config

WiFi-Settings WiFi Config
From this option, you can perform WiFi configuration. After you access
this option, the SSID & WEP KEY option will be displayed
4.5.3.1 SSID & WEP KEY
WiFi-Settings WiFi Config SSID & WEP KEY
This option enables you to set SSIDs and WEP keys. When you highlight
one of the following options, its current setting will be displayed in the
adjacent bubble
Any
Select this option to enable the Any setting: the SSID is broadcast and the
WEP key is null
SET1 ~ SET4
Select from SET1 ~ SET4 to configure a set of SSID and WEP key and
activate the configuration
To edit the SSID, select SSID. Enter the SSID (32 alphanumeric
characters maximum), and press the left soft key (Ok) to complete the
operation
- The SSID cannot be left blank; otherwise Illegal Input will be
displayed
To edit the WEP key, select WEP KEY
- Select Null to set the WEP key to null
- If 64Bit is selected, you can select Edit or Activate to edit or
activate the 64Bit WEP key. While editing the WEP key, ensure that
the WEP key consists of five ASCII characters or ten hexadecimal
characters
Menu
57