Settings; Security - UTStarcom UTS-C3000 User Manual

c3000_2 2004.9.14 7:5 PM 페이지40

SETTINGS

SETTINGS

SECURITY

Prevents others from using the phone without permission
and allows an access to a security features only after
pasword input.
1
1
Press [ ].
2
2
Press [ ], then [
The default Lock Code is "0000"
1. Security Mode
1. Security Mode
To set security mode.
1 Press [ , ,
1
2 Press [ ].
2
Select "Off", "Always","Now" or "Power On" and then.
- off : Normal phone mode.
- Always : Go to lock mode immediately.
- Now : Go to lock mode now. If user input lock code by some reason
such as menu entering, phone is unlocked.
- Power on : Go to lock mode when the phone is powered up. If user
input lock code by some reason such as menu entering,
phone is unlocked.
3 Press [ ].
3
40
].
] and enter "password".
SETTINGS
SETTINGS
2. Change PWD
2. Change PWD
Changes your 4-digit password.
1 Press [ , , ] and enter "password".
1
2 Press [ ] to select.
2
3 Enter a new password and press [
3
Enter a new password again and press[
3. Privacy Lock 3. Privacy Lock
This function enables locking each function separately.
1 Press [ , , ] and enter "password".
1
2 Press [ ] and select "Off", "On" by using navigation key
2
[ ][ ] on each items.
To save, press [ ] or [
4. Call Restrict
4. Call Restrict
User cannot make a call as selected restriction mode.
1 Press [ , , ] and enter "password".
1
2 Press [ ] and select "Off", "On" by using navigation key
2
[ ][ ] on each items.
To save, press [ ] or [
].
].
].
].
41