Settings - UTStarcom C1222 User Manual

10. SETTINGS

10.1 Lock Mode
To prevent others from using the phone without
permission and allow access to security features only
after inputting a password:
1. Press .
2. Press , .
The default Lock Code is "0000."
10.1.1 Lock Mode
To set the Lock mode:
1. Press , , then enter "Lock Code."
2. Press .
Select "Off", "Always"," Now" or "Power On" and then
- Off: Normal phone mode
- Always: Phone immediately locks.
- Now: Phone immediately locks. To unlock the phone, input lock
code via menu entry.
- Power on: Phone immediately locks when powered on. To unlock
the phone, input lock code via menu entry.
3. Press .
Settings
55