Random Assemble Editing - JVC HR-S9600EK Instructions Manual

42
Ra ndom As-
semble Editing
Player
Audio signal
(w/PAUSE connector)
Recorder
1 3
2
PRO G
Downloaded from: https://www.usersmanualguide.com/
PAUSE/
R.A. EDIT
Your recorder
Video signal
Another recorder
Mini-plug Cable
REMOTE
PAUSE
(Not provided)
4
0
4
3
1
2
AD VAN CED O PERATIO N S (cont.)
This function makes it easier to create edited videos when your
video recorder is used as the source player in combination with
another J VC video recorder equipped with a Remote PAUSE
Connector. You can pre-program up to 8 scenes or " cuts" for
automatic editing in the sequence you have specified.
You can also perform Random Assemble Editing with a second
non-J VC recorder. (
MAKE CO N N ECTIO N S
1
Connect your recorder's AV1 IN/OUT or S OUT/
AUDIO OUT connectors to the VIDEO IN and AUDIO
IN connectors on the recording deck, and connect your
recorder's PAUSE/R.A. EDIT connector to the PAUSE
connector on the recording deck.
● If the recording deck doesn't have a PAUSE connec-
● The Mini-plug cable is a mono 3.5 mm mini-plug to
PREP ARE FO R EDITIN G
2
Insert the cassette to be recorded on into the recorder
and set the recorder's input mode.
LO AD SO URCE CASSETTE
3
Insert the source cassette into your recorder.
SET EDIT MO DE
4
See "Picture Control" on page 35.
ST ART SO URCE PLAYBACK
5
Press PLAY .
ACCESS R.A. EDIT SCREEN
6
8 Press R.A. ED IT .
O R
Press M EN U to access MAIN MENU screen and press
%fi to move the highlight bar (pointer) to "R.A. EDIT",
then press O K .
● The screen is superimposed on the video playback in
O K
pg. 43)
tor, connect to the R.A. EDIT connector instead.
mono 3.5 mm mini-plug connector.
step 7 .