3. SETTING ORIGINALS (Cont.)
When Placing an Original on the Glass
1
1
Raising the original cover or the reversing automatic
document feeder (optional), place the original face
down on the glass.
2
2
Align the original against the left inner corner of the
glass.
3
3
Lower the original cover or the reversing automatic
document feeder (optional) slowly.
4
When copying originals with high transparency, such as OHP
films and tracing paper, place a blank sheet of paper the size
5
of the original or larger over the original.
6
7
1
Raising the original cover or the reversing automatic
document feeder (optional), place the original in the
direction shown in the illustration.
8
- When using the Book-Type Originals 2-sided Copies (
Page 3-13) or the Dual-Page (
tre the book original on the yellow indicator line.
9
2
Lower the original cover or the reversing automatic
document feeder (optional) slowly.
- Do not try to force the original cover or reversing automatic
10
document feeder (optional) to fully close over a very thick
original, such as a big book. Copies can be made even if
the cover or feeder does not close fully.
- During copying, an intense light may leak out. Do not look
11
at the original glass surface.
12
2-10
HOW TO MAKE COPIES
Sheet Originals
Book-type Originals
Page 5-6) function, cen-
Original
Blank sheet
Original