Electrostatic Discharge; Regulatory Specifications; Server Model Number - Silicon Graphics Virtu VN200 Hardware User's Manual

Electrostatic Discharge

Regulatory Specifications

!

Server Model Number

007-5483-001
SGI designs and tests its products to ensure that they resist the effects of electrostatic
discharge (ESD). However, it is still possible for ESD to cause problems that range from
data errors and lockups to permanent component damage. To protect the systems from
ESD, follow these precautions:
• Minimize the use of carpeting at computer locations
(or consider special static-reducing carpet).
• Ensure that all electronic devices are properly grounded.
• Keep chassis doors and access panels closed while the system is operating.
• Fasten all screws, thumbnail-fasteners, and slide locks securely.
• Use a grounded static wrist strap whenever you work with the chassis or
components.
• Use antistatic packing material for storage and transportation.
• Clear the site of all devices that create static electricity or provide possible sources of
EMI.
The SGI Virtu VN200 graphics node conforms to several national and international
specifications and European Directives listed on the "Manufacturer's Declaration of
Conformity." The CE insignia displayed on each device is an indication of conformity to
the European requirements.
Caution: Each SGI server has several governmental and third-party approvals, licenses,
and permits. Do not modify this product in any way that is not expressly approved by
SGI. If you do, you may lose these approvals and your governmental agency authority
to operate this device.
The CMN (model) number for each server is printed on the system label on the unit.
Regulatory Specifications
17