Removing Tim From A Heatsink - Silicon Graphics Virtu VN200 Hardware User's Manual

Removing TIM from a Heatsink

007-5483-001
Note: Be sure to remove TIM from the gaps between the processor and the load plate.
If you plan re-use the heatsink with a replacement processor, you need to remove the TIM
from the heatsink.
Warning:
Always wear gloves when performing this procedure to avoid direct skin
contact with the TIM, which is a potentially toxic material.
Tools/Parts Required:
• Dry, lint-free cloth
• Lint-free cloth moistened with isopropyl alcohol
• Gloves
Perform the following steps to remove the TIM from a heatsink:
Hardware Replacement Procedures
87