Travis Industries 564 HO GS Installation Manual page 55

Optional Equipment
16 Disconnect the power lead from accent light and connect it to the power lead included with this kit
(see Figure 26). Attach the power lead to the fan controller in the "AUX OUT" receptacle (see
Figure 27).
NOTE: If using the optional fan, you will want to disconnect its power lead and connect it to
the extra power lead included with this kit, then connect it to the "FAN" receptacle on
the fan controller.
17 Attach the included velcro to the bottom of the fan control module and to the base of the fireplace
near back left of the fireplace. Slide the fan controller into place and secure using the velcro (see
Figure 28).
© Travis Industries
Figure 26
(
for qualified installers only)
Figure 28
4110505
Figure 27
100-01263_000
55