Travis Industries 564 HO GS Installation Manual page 50
Built-in direct vent fireplace natural gas or propane residential or mobile home
Hide thumbs
Also See for 564 HO GS:
- Installation manual (44 pages) ,
- Owner's manual (28 pages) ,
- Installation instructions manual (9 pages)
Table of Contents
Advertisement
Optional Equipment
50
3
Unplug the ac adapter from the power harness (see Figure 6). You can leave the ac adapter
plugged into the wiring harness.
4
Disconnect the molex connector leading to the gas control valve (see Figure 7).
WARNING: The tabs on the gas control valve are fragile. Take care when removing the molex
connector to not pull or damage the wires or tabs.
5
Disconnect the two leads on the back of the control panel for the IPI / CPI switch (continuous pilot
/ greensmart pilot – see Figure 8).
© Travis Industries
(
for qualified installers only)
Figure 6
Figure 7
Figure 8
4110505
50
100-01263_000
Advertisement
Table of Contents
