Intake Restrictor Adjustment - Travis Industries 564 HO GS Installation Manual

Intake Restrictor Adjustment

The intake restrictor is shipped with the burner. See the burner installation instructions for details on
installing this component.
Make sure to adjust the intake restrictor to the position indicated on the vent configuration page. To
adjust the restrictor, loosen the two screws securing the restrictor to the firebox and slide it to the correct
position as shown below.
Dancing/DiamondFyre
Intake Restrictor:
6
4
3
2
1
© Travis Industries
Installation
(
Intake Restrictor -
located on rear wall of firebox
5
for qualified installers only)
Position #1 (open)
EmberFyre
Intake Restrictor:
6
5
4
3
2
1
4110505
21
100-01263_000