Travis Industries 564 HO GS Installation Manual page 52
Built-in direct vent fireplace natural gas or propane residential or mobile home
Hide thumbs
Also See for 564 HO GS:
- Installation manual (44 pages) ,
- Owner's manual (28 pages) ,
- Installation instructions manual (9 pages)
Table of Contents
Advertisement
Optional Equipment
52
9
Use the included torx wrench to remove the stock regulator (see Figure 15). These items may be
discarded.
10
The stepper motor (adjustable regulator) has an installation sheet included with it – make sure to
follow all of the directions. Place the stepper motor on the gas control valve (see Figure 16) –
MAKE SURE IT IS CORRECTLY ORIENTED. Secure using the screws included with the motor
(see Figure 17) – tighten to 25 Lb-inches. Leak test this area after installation to verify proper
installation.
11
Place the GreenSmart wiring harness in front of the fireplace, noting the position of each
connector (see .Figure 18).
© Travis Industries
Figure 16
(
for qualified installers only)
Figure 15
Figure 18
4110505
Figure 17
100-01263_000
52
Advertisement
Table of Contents
