Table of Contents
Advertisement
Chapter 2
Installations
2.1 Memory Module（ （ （ （ SODIMM） ） ） ） Installation
The IC70 Motherboard provides two 204-pin SODIMM slot. The socket supports up
to 8GB DDR3 800/1066 SDRAM. When installing the Memory device, please follow
the steps below：
Step.1. Firmly insert the SODIMM at an angle into its slot. Align the SODIMM on the
slot such that the notch on the SODIMM matches the break on the slot.
Step.2. Press downwards on SODIMM until the retaining clips at both ends fully snap
back in place and the SODIMM is properly seated.
2.2 I/O Equipment Installation
2.2.1 12V DC-IN
The Motherboard allows plugging 12V DC-IN jack on the board without another
power module converter under power consumption by Intel Socket G1 processor in
®
HM55 with Intel
5 series chipset.
2.2.2 PS/2 Keyboard and PS/2 Mouse
The Motherboard provides two PS/2 interface. The PS/2 connector supports Keyboard
6
IC70 Motherboard User Manual
Advertisement
Table of Contents
