Chapter 2
2.1 Memory Module(SODIMM)Installation
The V270 Motherboard provides one 200-pin SODIMM slot. The socket
supports up to 2GB DDR2 533 SDRAM. When installing the Memory device,
please follow the steps below:
Step.1. Firmly inserts the SODIMM at an angle into its slot. Align the SODIMM
on the slot such that the notch on the SODIMM matches the break on the slot.
Step.2. Press downwards on SODIMM until the retaining clips at both ends fully
snap back in place and the SODIMM is properly seated.
Caution
!
The SODIMM only fits in one correct orientation. It will cause
permanent damage to the development board and the SODIMM if
the SODIMM is forced into the slot at the incorrect orientation.
V270 Motherboard User Manual
Installations
6