Http Event; General; Alarm Sending - Beward N6601 Operation User's Manual

8.3. HTTP Event

8.3. HTTP Event 8.3. HTTP Event
Set up this menu for sending commands to an HTTP server. By using HTTP client function, Set up this menu for sending commands to an HTTP server. By using HTTP client function, Set up this menu for sending commands to an HTTP server. By using HTTP client function,
you can send a defined command, linked with the external sensor input or with the built-in motion you can send a defined command, linked with the external sensor input or with the built-in motion you can send a defined command, linked with the external sensor input or with the built-in motion
detection function to an HTTP server. HTTP Event setting menu is composed of two tabs, detection function to an HTTP server. HTTP Event setting menu is composed of two tabs, detection function to an HTTP server. HTTP Event setting menu is composed of two tabs,
[General] and [Alarm sending]. Select [ON] and you can start setting up the function. [General] and [Alarm sending]. Select [ON] and you can start setting up the function. [General] and [Alarm sending]. Select [ON] and you can start setting up the function.

8.3.1. General

8.3.1. General 8.3.1. General
HTTP Event: set up the HTTP server URL, port, User ID, Password, and Proxy Server HTTP Event: set up the HTTP server URL, port, User ID, Password, and Proxy Server HTTP Event: set up the HTTP server URL, port, User ID, Password, and Proxy Server
settings. For example: URL: 192.168.1.7/cgi-bin/operator/ptzset settings. For example: URL: 192.168.1.7/cgi-bin/operator/ptzset settings. For example: URL: 192.168.1.7/cgi-bin/operator/ptzset
NOTE! NOTE! NOTE!
The setting of URL should be the same as CGI. The setting of URL should be the same as CGI. The setting of URL should be the same as CGI.

8.3.2. Alarm Sending

8.3.2. Alarm Sending 8.3.2. Alarm Sending
Set to send the commands via the alarm detection, external sensor input or built-in motion Set to send the commands via the alarm detection, external sensor input or built-in motion Set to send the commands via the alarm detection, external sensor input or built-in motion
detection function. Select [ON] to send the commands to HTTP server linked with the alarm detection function. Select [ON] to send the commands to HTTP server linked with the alarm detection function. Select [ON] to send the commands to HTTP server linked with the alarm
detection (Pic. 8.8). detection (Pic. 8.8). detection (Pic. 8.8).
N6601 Operations User Manual N6601 Operations User Manual N6601 Operations User Manual
Chapter 8. Setting-Advance menu Chapter 8. Setting-Advance menu Chapter 8. Setting-Advance menu
Pic. 8.7 Pic. 8.7 Pic. 8.7
50 50 50