Yamaha TZ125M1 Owner's Service Manual page 180

FRONT BRAKE AND REAR BRAKE
5-19
3. Install:
[Front]
• Spring 1
To master cylinder cup (secondary) 2.
[Rear]
• Spring 1
To master cylinder piston 2.
NOTE:
Install the spring at the smaller dia. side.
W
After installing, cylinder cup should be
installed as shown direction. Wrong instal-
lation cause improper brake performance.
A Front
B Rear
4. Install:
• Master cylinder kit 1
• Circlip 2
• Master cylinder boot 3
To master cylinder 4.
NOTE:
• Apply the brake fluid on the master cylinder
kit.
• When installing the circlip, use a long nose
circlip pliers.
A Front
B Rear
EC535421
Front master cylinder
1. Install:
• Reservoir tank 1
• Bolt (reservoir tank) 2
5 Nm (0.5 mdkg, 3.6 ftdlb)
T
• Reservoir hose 3
CHAS