Yamaha TZ125M1 Owner's Service Manual page 121

CLUTCH
6. Bend the lock washer 1 tab.
7. Install:
• Friction plate
{yellow [d=ø95 mm (3.7 in)]} 1
• Clutch plate 2
• Friction plate
{brown [d=ø100mm (3.9 in)]} 3
• Cushion spring 4
• Friction plate
{brown [d=ø95 mm (3.7 in)]} 5
NOTE:
• Install the clutch plates and friction plates
alternately on the clutch boss, starting with a
friction plate and ending with a friction plate.
• Yellow colored friction plates are used for the
first and final.
• Install the larger inner diameter friction plate
[d=ø100 mm (3.9 in)] together with the cush-
ion spring, and place them at second from the
innermost.
• If grease or oil sticks to any of the clutch
plates, friction plates and cushion spring, be
sure to clean them with solvent or replace
them.
8. Install:
• Push rod 1
• Ball 2
NOTE:
Apply the lithium soap base grease on the
push rod and ball.
4-33
ENG