Yamaha TZ125M1 Owner's Service Manual page 147

CDI MAGNETO
EC4L3000
REMOVAL POINTS
EC4L3101
Rotor
1. Remove:
• Nut (rotor) 1
A
• Plain washer 2
Use the rotor holding tool 3.
Rotor holding tool:
YU-01235/90890-01235
A 2. Remove:
• Rotor 1
Use the flywheel puller 2.
Flywheel puller:
YM-01189/90890-01189
NOTE:
When installing the flywheel puller, turn it coun-
terclockwise.
EC4L4000
INSPECTION
EC4L4101
CDI magneto
1. Inspect:
• Rotor inner surface a
• Stator outer surface b
Damage ≥ Inspect the crankshaft runout
and crankshaft bearing.
If necessary, replace CDI magneto and/or
stator.
EC4L4200
Woodruff key
1. Inspect:
• Woodruff key 1
Damage ≥ Replace.
EC4L5000
ASSEMBLY AND INSTALLATION
EC4L5144
CDI magneto
1. Install:
• Stator 1
• Screw (stator) 2
4-59
ENG
7 Nm (0.7 mdkg, 5.1 ftdlb)
T