Yamaha TZ125M1 Owner's Service Manual page 134

SHIFT SHAFT AND OIL PUMP
4. Install:
• Gasket (oil pump) 1N
NOTE:
Install the gasket in accordance with the
shapes of the oil passages a.
5. Install:
• Oil pump assembly 1
NOTE:
• Apply the molybdenum disulfide oil on the oil
pump shaft 2.
• When installing the oil pump assembly, turn
the oil pump shaft until its key end a is in the
recess b of the impeller shaft 3.
6. Install:
• Screw (oil pump assembly) 1
• Shim 2
7. Install:
• Oil pump driven gear 1
• Dowel pin 2
• Plain washer 3
8. Install:
• Circlip 1N
4-46
ENG
7 Nm (0.7 mdkg, 5.1 ftdlb)
T