Yamaha TZ125M1 Owner's Service Manual page 120

3. Install:
• O-ring 1N
• Spacer 2 2
To clutch housing 3.
NOTE:
• Apply the lithium soap base grease on the O-
ring and oil seal lip.
• When installing the spacer 2, pay careful
  
attention to the clutch housing oil seal lip a.
4. Install:
• Clutch housing 1
• Clutch boss 2
NOTE:
Install the clutch housing with the clutch boss
pushed on it so that the spacer 2 will not come
off.
5. Install:
• Lock washer 1N
• Nut (clutch boss) 2
NOTE:
Use the clutch holding tool 3, 4 to hold the
B
clutch boss.
A For USA and CDN
B Except for USA and CDN
4-32
ENG
CLUTCH
50 Nm (5.0 mdkg, 36 ftdlb)
T
Clutch holding tool:
YM-91042 . . . . . . . . . . . . . . . .3 3
90890-04086 . . . . . . . . . . . . .4 4