Setup In Nds Mode; Set-Up Example - Toshiba e-studio16 Operator's Manual

SETUP IN NDS MODE

When using NetWare 5.x and Windows 95/98/Me/NT/2000/XP, set up the e-STUDIO16/20/25
using NetWare Administrator.
NOTES:
G Set up in the print server mode. The remote printer mode cannot be used.
G The PCONSOLE is not available for NetWare 5.x. Therefore, the print queue cannot be
created in the bindery mode.
G The e-STUDIO16/20/25 does not support the NDPS mode of NetWare 5.x.
The following example is performed under the conditions stated below. Check the conditions of
the environment you are using.
<Server>
• NetWare server name
• Directory tree name
• Print Server Context
<Contents to be set>
Name the following as desired.
• Print queue name
• Printer name
• Print server name
76

Set-up Example

: NWSRV
: ORG (They must correspond with the names to be set
for the printer using MAP or NetPanel.)
: ORG (They must correspond with the names to be set
for the printer using MAP or NetPanel.)
: TOS_QUE
: TOS_PRN
: TOS_SRV (They must correspond with the names to be
set for the printer using MAP or NetPanel.)