Wnp Setting - Toshiba e-studio16 Operator's Manual
For printer function print kit
Hide thumbs
Also See for e-studio16:
- Administrator's manual (134 pages) ,
- Operator's manual (126 pages) ,
- Specification sheet (14 pages)
Table of Contents
Advertisement
➀
BackGround Image
Select whether to enable or disable the display of the background image.
NOTE: It is set to "Enable" as a factory default.
➁
Refresh Rate (Seconds)
Enter the rate (in seconds) that NetPanel should wait before it updates the page. If the page refresh rate is set to "0",
then Netpanel will not automatically update the page. You can set the range from 60 to 300 seconds.
NOTE: It is set to "0" as a factory default. If this is set to a number other than 0, the [Refresh Status] button on the
System Properties Page, Connection Properties Page, and Status Diagnose Page disappears.
➂
How Many Printers showed per page
Enter the number of the printers to be displayed per page. This must be greater than "0".
NOTE: It is set to "10" as a factory default.
➃
New Window for Help Document
Select whether to enable or disable the display of the help contents in a new window or within the same frame.
NOTE: It is set to "Enable" as a factory default.
➄
[OK]
Click this to save changes.
212
WNP Setting
➀
➁
➂
➃
➄
Advertisement
Table of Contents
