Set Up The Pconsole Utility Options; Setting Up Notify Options For The Printer - Toshiba e-studio16 Operator's Manual

SET UP THE PCONSOLE UTILITY OPTIONS

Setting Up Notify Options for the Printer

You can specify users or groups of users that are notified if a problem occurs when a print job is
sent to the printer. If the print server is servicing queues on multiple file servers, you must set up
a NOTIFY list for each file server. To set up NOTIFY, use the following procedures:
1
Start the PCONSOLE utility.
2
Select "Print Servers" in the "Available Option" menu.
3
When a message appears, press the [Enter] key.
4
Select print server in the "Print Server" menu.
5
Select "Printers" in the "Print Server Information" menu.
6
Select printer in the "Defined Printers" menu.
7
Select "Notification" in the "Printer XXXX Configuration" menu ( XXXXX the name
of the printer ).
8
Select server in "NetWare Server/Object to be Notified/Object Type/First/Next/
State", and then press the [Enter] key.
9
The Notify Intervals screen displays.
10
Select the user or user group from the Notify Candidates screen.
11
The Notify Intervals screen displays.
12
Enter a number for the First and Next intervals for notifying users about printer
problems and press Enter key.
G The First interval is the number of seconds the network waits before it notifies users about a print job
problem.
G The Next interval specifies how often in seconds users are notified.
13
Press the Esc key and save all changes.
14
Press the Esc key until you see the prompt to exit PCONSOLE. Select Yes and
then press the Enter key.
73