Primary File Server; Preferred File Servers - Toshiba e-studio16 Operator's Manual

To use the primary file server option, use the following procedure on a file server close to the
printer:
1
Select File Server To Be Serviced from the Print Server Configuration menu.
2
The list of the file servers to be serviced by the primary file server is displayed.
3
Press the Insert key.
4
The Available File Servers list is displayed.
5
Select the name of the file server to be serviced and press the Enter key.
6
The selected file server is added to the File Servers To Be Serviced list.
7
Press the Esc key to return to the menu.
8
Install the Print Server Card on each of the primary file servers.
The Preferred File Server can be identified within the Network Interface Card itself. The
registration of the preferred file server is offered at MAP. If a preferred file server is listed, the
Network Interface Card will attach to this identified file server instead of initiating the automatic
search for file servers. If the preferred file server is also a primary file server (for example, has
file servers listed under file servers to be serviced), the Network Interface Card will connect
directly to these file servers.
The Preferred File Server is only applicable to bindery-based queues. Entering it has no affect
on NDS queues. For registering the preferred file server to the NIC, see "MAP - NetWare
Setup."

Primary File Server

Preferred File Servers

53