Assigning The Ip Address From The Control Panel - Toshiba e-studio16 Operator's Manual

Assigning the IP Address from the Control Panel

In Standby Mode, press
1
G The PROGRAM menu is displayed.
2 Press +
to select INITIAL SETUP.
3 Press +
to select NETWORK.
G NETWORK is outside of the Message Display
Panel. Press
4 Press +
to select TCP/IP.
5
When the IP address can be obtained
from the DHCP server, continue to
"Use DHCP Server".
When the IP address is assigned
manually, continue to "Assign IP
Address Manually".
Use DHCP Server
SUPPLEMENTS:
G When the IP address is obtained from the DHCP server, TCP/IP printing cannot be
performed because the IP address changes each time the printer is powered on.
G If there is a WINS server and you want to use a WINS name for the NIC, see "Assigning
IP Address using MAP". By configuring the port with a WINS name instead of an IP
address, TCP/IP printing can be performed.
key.
on the Dial Keypad
on the Dial Keypad
to display the desired item.
on the Dial Keypad
PROGRAM
01.DEFAULT SETTING
02.LISTS
03.INITIAL SETUP
INITIAL SETUP
02.LANGUAGE
03.TERMINAL ID
04.NETWORK
TIP
"03. TERMINAL ID" appears on the menu only
when the FAX option is installed.
NETWORK
01.COMPLETE
02.TCP/IP
03.NETWARE
TCP/IP
01.BOOTP/DHCP
02.IP ADDRESS
03.SUBNET MASK
15