Novell Settings - Toshiba e-studio16 Operator's Manual

NOVELL SETTINGS

When using the NetWare server for printing, the Novell Settings must be configured to enable
connection to the printer via the IPX/SPX protocol.
1
In Standby Mode, press
G The PROGRAM menu is displayed.
2 Press +
to select INITIAL SETUP.
3 Press +
to select NETWORK.
G NETWORK is outside of the Message Display
Panel. Press
4 Press +
to select NETWARE.
5 Press +
to select IPX/SPX.
6 Press on the Dial Keypad to
select ENABLE.
G The display returns to the TCP/IP menu.
7 Press +
to select the FRAME TYPE.
G If you do not have to change the frame type of
the NIC, skip to Step 9.
key.
on the Dial Keypad
on the Dial Keypad
to display the desired item.
on the Dial Keypad
on the Dial Keypad
on the Dial Keypad
PROGRAM
01.DEFAULT SETTING
02.LISTS
03.INITIAL SETUP
INITIAL SETUP
02.LANGUAGE
03.TERMINAL ID
04.NETWORK
TIP
"03. TERMINAL ID" appears on the menu only
when the FAX option is installed.
NETWORK
01.COMPLETE
02.TCP/IP
03.NETWARE
NETWARE
01.IPX/SPX
02.FRAME TYPE
IPX/SPX
1.ENABLE
2.DISABLE
NETWARE
01.IPX/SPX
02.FRAME TYPE
23