You can operate the following functions by clicking each link on the NIC Configure Display.
Protocols Configuration
After you modify the settings, please perform a "Printer Reset to PowerOn" to enable the new
settings.
➀
TCP/IP Protocol
Select whether to "Enable" or "Disable" network communications using the TCP/IP protocol.
NOTE: It is set to "Enable" as a factory default.
➁
IPX/SPX Protocol
Select whether to "Enable" or "Disable" network communications using the IPX/SPX protocol.
NOTE: It is set to "Enable" as a factory default.
➂
AppleTalk
Select whether to "Enable" or Disable" network communications on an AppleTalk network.
NOTE: It is set to "Disable" as a factory default.
➃
Device Password
The device password is required to save changes. The device password is automatically entered in the field.
➄
[Change Now!]
Click on this to save changes.
NIC Configure
➀
➁
➂
➃
➄
187