Figure 2-7 Lift Handles Mounted - HP 9000 rp7420 Installation Manual

Hp 9000 rp7420 server installation guide

Hide thumbs Also See for 9000 rp7420:

Table of Contents

Step 9. Ensure that the handles are secure by pressing the handles together and moving back and forth.

Figure 2-7 Lift Handles Mounted

Step 10. Repeat steps 4 through 9 to install handle panel on the opposite side of server.

Step 11. To lift the server, two individuals may rotate the handles 90 degrees to the horizontal position and

grasp.

NOTE

Step 12. After moving the server, remove the lift handle panels from the chassis.

Step 13. After the server is secured, re-install the previously removed cell boards and bulk power supplies.

Step 14. Reinstall the side covers and front bezel.

Chapter 2

To ensure proper installation, refer to the "Installation Guide" of the HP J1530B

Rack Integration Kit.

Unpacking the Server

Manual Lifting

Table of Contents