Table of Contents
Advertisement
Unpacking the Server
Using the RonI Model 17000 SP 400 Lifting Device
Step 4. Remove the two foam cushions for lift access as shown in Figure 2-10.
Figure 2-10 Remove Cushions for Lift Access
Remove Cushions
Clearance for RonI lift is
28" x 5"
Step 5. Carefully position the lifter forks under the server until lift is against side of server.
Step 6. Slowly raise the server off the pallet until it clears the pallet cushions.
24
Chapter 2
Advertisement
Table of Contents
