Table of Contents
Advertisement
Introduction
Overview
Overview
The HP 9000 rp7420 Server is a 10U, 8-socket Symmetric Multi-Processing, rack-mount server that
accommodates up to 64 GB of memory; PCI-X I/O, and internal peripherals, including disks and DVD/tape.
Its high availability features include N+1 hot-pluggable fans and power, redundant power cords, and
hot-pluggable PCI-X cards and internal disks. It currently uses dual core, PA-RISC processors. Features of
the server include:
•
Up to 64GB of physical memory using HP supported 2GB dual in-line memory modules (DIMMs).
•
Up to 16 processors with a maximum of eight processor modules per cell board with a maximum of two
cell boards. There are four processor module sockets per cell board and each socket will accept a dual-core
processor so each cell will support up to eight processors.
•
One cell controller (CC) per cell board.
•
All CPUs and cell controllers on the cell boards are cooled with turbo cooler fans.
•
Four embedded hard disk drives. Available sizes are 36GB, 73GB, and 146GB drives.
•
One internal DVD drive or one 40GB DDS-4 DAT drive.
•
Two front chassis mounted N+1 fans.
•
Two rear chassis mounted N+1 fans.
•
Six N+1 PCI-X card cage fans.
•
Two N+1 bulk power supplies.
•
Sixteen PCI-X slots divided into two partitions. Each partition can accomodate up to eight PCI cards.
•
Two MP (Management Processor-MP)/SCSI Core I/O cards.
•
One failover service processor per core I/O card.
•
Four 220 VAC power receptacles. Two are required and the other two provide power source redundancy.
2
Chapter 1
Advertisement
Table of Contents
