Table of Contents
Advertisement
Step 1. Obtain the HP J1530B Rack Integration Kit Installation Guide before proceeding with the
rack-mount procedure. This guide covers these important steps:
•
Installing the anti-tip stabilizer kit (A5540A)
•
Installing the ballast kit (J1479A)
•
Installing the barrel nuts on the front and rear columns
•
Installing the slides
Step 2. Follow the instructions on the outside of the server packaging to remove the banding and cardboard
top from the server pallet.
Figure 2-9 Server with Shipping Box Removed
Step 3. Remove all cartons from the pallet, leaving only the server.
Chapter 2
Using the RonI Model 17000 SP 400 Lifting Device
Unpacking the Server
23
Advertisement
Table of Contents
