Table of Contents
Advertisement
CAMERA TITLE : Determines whether the camera title is displayed.
EVENT ICON : Determines whether the DVR recording status is shown at the top right of each channel
display window.
BORDER : Determines whether there is a border around each channel in multi screen display mode.
MOTION SENSOR DISPLAY : If false motion recording is occurring, the operator can use this feature to
OFF – normal display mode.
ACTIVE – areas where motion is detected are highlighted with colored blocks.
INACTIVE – areas where no motion is detected are highlighted with colored blocks.
MOTION COLOR: The color of the blocks displayed when MOTION SENSOR DISPLAY is set to
ACTIVE or INACTIVE.
LANGUAGE: To change the Language, after selecting the language, please press the APPLY button, Then system will
reboot and language will be changed.
DISPLAY - MONITOR
SEQUENCE DWELL : The time that each screen is displayed in a sequence operation.
DE-INTERLACE MODE : When recording any channels in D1 resolution (704 x 480 / 704 x 576) this should be set to
ALARM POP-UP MODE : When set to ON, an alarm input will cause the associated channel to display
ALARM POP-UP DWELL : Determines how long the full screen popup is displayed after an alarm input.
MOTION POP-UP MODE : When set to ON, motion detection will cause the associated channel to display
MOTION POP-UP DWELL : Determines how long the full screen popup is displayed after motion detection.
To change any of these settings, highlight MONITOR and press ENTER to select.
determine and rectify the cause in realtime.
ON to prevent judder during playback.
full screen.
If the alarm condition continues, the popup screen is displayed constantly.
full screen.
If motion continues, the popup screen is displayed constantly.
Click the MONITOR menu and click the ON/OFF menu.
Then, click the
button for ON/OFF.
Advertisement
Table of Contents
