L I V E D I S P L A; D I V I S I O N S C R E E - Ganz Digimaster DR4N-Lite Instruction Manual

LIVE DISPLAY
DIVISION SCREEN
After startup diagnostics are complete, the operator must
logon to the system. The default user name is 'ADMIN'.
the default password of '1234' and press the ENTER
button.
Double click on the Password tap then the Virtual Keyboard will be
appeared. Then, click the password and click the OK button.
The DVR begins normal operation and shows the
default display of all 4 channels.
The status bar at the bottom of the screen shows
current time and date and percentage of hard drive used.
A title for each channel is shown.
The red square and letter 'C' in the top right of each channel
display shows that the channel is recording in Timer / Schedule
mode.
2 different display modes are supported by the 4 channel DVR.
By repeatedly pressing the DISPLAY button, the operator can choose
between single screen, 4 screen and basic sequence modes.
Press the Enter button. Then red square on camera title will be shown.
If pressing the Enter button again by moving the navigation key,
user can select the single display channel.