Detail Setup - Ganz Digimaster DR4N-Lite Instruction Manual

DETAIL SETUP

In the 'Camera Assignment' window, specific channels of the DVR can be allocated to the remote client display channels.
Using the drop down lists under DVR, select which channels are displayed and in to which position.
To ignore certain channels, leave the drop down as 'x'
In this case, only channels 1-4 from the selected DVR will be displayed.
Note: only one instance of each channel can be selected.
Each connection group can display a total of 16 channels from one or more DVRs. For example, a connection
group could consist of one 16ch DVR and display all 16 channels.
Or, it might consist of two 16 channel DVRs and display 7 channels from one and 9 channels from another.
To complete the details for the selected DVR:
-Tick the event occurrences that the DVR will send to the remote client system log.
-Tick 'Audio out' to enable or disable the audio talkback function.
-Tick 'Alarm out' to enable the remote alarm trigger function.
-In 'Monitoring audio' choose which DVR audio input is transmitted to the remote client software during
Details for up to 4 DVRs can be added to the
'OFFICE' group. Click 'OFFICE' to highlight it
and then enter the following information in the
'DVR Information' window.
Name: Any name that will easily identify the DVR.
IP / Domain Name: The IP or DDNS address of the DVR.
Port: The network port of the DVR.
User ID: A valid user ID already setup on the DVR.
Password: The password assigned to the user ID.