Tone" Module: Tone Definition Settings - Alcatel Temporis IP150 Manual

"tone" Module: Tone Definition Settings

The Tone Definition settings configure data for various tones for the purpose of
localization. The Audio Manager component uses the data from this model to populate
the mcu on bootup.
The tone definition settings follow the format: tone.element.x, where x is the index of the
elements, ranging from 1 to 5.
Each definition (or tone element) must be a string of 12 elements separated by a space:
"<num of freq> <freq1> <amp1> <freq2> <amp2> <freq3> <amp3> <freq4> <amp4> <on duration> <off
duration> <repeat count>"
Where:
<num of freq>: 0–4
<freq1>: 0–65535
<amp1>: -32768–32767
<freq2>: 0-65535
<amp2>: -32768-32767
<freq3>: 0-65535
<amp3>: -32768-32767
<freq4>: 0-65535
<amp4>: -32768-32767
<on duration>: 0-2^32
<off duration>: 0-2^32
<repeat count>: 0-65535
All these settings are exported when you manually export the configuration from the
phone.
Setting
tone.call_waiting_tone.num_of_elements
tone.call_waiting_tone.element.1
tone.call_waiting_tone.element.[2-5]
tone.hold_reminder.num_of_elements
tone.hold_reminder.element.1
tone.hold_reminder.element.[2-5]
tone.inside_dial_tone.num_of_elements
tone.inside_dial_tone.element.1
tone.inside_dial_tone.element.[2-5]
tone.stutter_dial_tone.num_of_elements
tone.stutter_dial_tone.element.1
tone.stutter_dial_tone.element.2
Temporis IP150 Administration and Provisioning Guide
Description Default
1
"1 440 -120 0 0 0 0 0 0 500 0
1"
blank
1
"1 770 -120 0 0 0 0 0 0 300 0
1"
blank
1
"2 440 -180 350 -180 0 0 0 0
4294967295 0 65535"
blank
2
"2 440 -180 350 -180 0 0 0 0
100 100 10"
"2 440 -180 350 -180 0 0 0 0
4294967295 0 65535"
ed 0.1 102/106