Signaling Settings - Alcatel Temporis IP150 Manual

Signaling Settings

Voice Settings
Setting
Local RTP port range
start
network.rtp.port_start
Local RTP port range
stop
network.rtp.port_end
NAT Traversal
Setting
Enable Masquerading
network.nat.masquerading_enable
Public IP address
network.nat.public_ip_addr
Public SIP port
network.nat.public_sip_port
Temporis IP150 Administration and Provisioning Guide
Description
Real-time Transport Protocol
(RTP) Ports are entered as a
range. This range is usually
specified by your service provider.
Enter the lower limit of the RTP
port range.
Enter the upper limit of the RTP
port range.
Description
Select to enable NAT
traversal via IP
masquerading.
Enter the external IP
address of your router.
Your router needs a static
IP address for IP
masquerading to work.
Enter the router port
number being used for
SIP.
Range Default
0-65535 18000
0-65535 19000
Range Default
1: Enabled 0
0: Disabled
IP address n/a
0-65535 5060
ed 0.1 44/106