1. SETUP Plug one end of the spiral cord into the handset plug (A), and the other end into the socket located on the left-hand side of the phone (B). Plug the telephone cord into the socket (C) situated on the back of the set and plug the other end (D) into the telephone wall socket.
Stick the phone number label there Peg for wall mounting 10 memories Message waiting lamp Memories and set programming Loudspeaker Redial/Pause Mute key Additional services access key Loudspeaker key * Loudspeaker and ringer * sound level adjustment * on TEMPORIS 22 only...
This light flashes in rhythm with the ringing when you receive a call. It lights up as soon as you take the line. If you are connected to a private ALCATEL telephone system equipped with mail, the message waiting lamp informs you of a message in your “mail box”.
Modification of the ringer can be carried out during a ringing phase. Press one of the keys 1, 2, 3 or 4 to change the melody. To reduce or increase ringing volume, press on TEMPORIS 22 or press on TEMPORIS 12.
Page 6
To adjust the ringing: Press the Programming key then key 1 (current melody is heard). To reduce or increase ringing volume, press on TEMPORIS 22 or press on TEMPORIS 12. Pressing a key between 1 and 4 changes the melody.
Page 7
6.4 IF YOU FORGOT THE PASSWORD Access the programming mode again and then: Press the Programming key followed by 0. Press the key. BEEP 2 beeps are generated. BEEP Go on hook. This last operation erases the WHOLE programming including memories.
Page 8
The certificate of conformity is available from the following Internet site: “www.atlinks.com”. Engineered by An ALCATEL/THOMSON multimedia Joint Venture Company Sales and Marketing Departments: 41 boulevard de la République - Bât. B6 - 78400 Chatou - France...
Need help?
Do you have a question about the TEMPORIS 22 and is the answer not in the manual?
Questions and answers