Alcatel Temporis IP150 Manual page 73

Import Configuration
You can configure the phone by importing a configuration file from your computer or your
local network. For more information about configuration file types and configuration file
formatting, see Provisioning Using Configuration Files on page 80.
To import a configuration file:
1. Click Browse to locate and open the configuration file.
2. Click Import.
The phone will update its configuration. If any of the updated settings require the phone
to restart, the phone will restart immediately, without waiting for one minute of activity.
Manually importing a configuration file differs from the auto-provisioning process in that
the phone does not check whether the file has been loaded before. The configuration file
is processed whether or not it is different from the current version.
Export Configuration
You can export all the settings you have configured on the WebUI and save them as a
configuration file on your computer. You can then use this configuration file as a backup,
or use it to update other phones.
To export the configuration file:
1. Click Export.
The format of the exported file is <model name>_<mac address>.cfg. For example,
Temporis_IP150_7465D1161234.cfg.
Exporting a configuration file generates two header lines in the configuration file. These
header lines provide the model number and software version in the following format:
#Model Number = xxxxxxx
#SW Version = xxxxxxx
You can use the exported file as a general configuration file, and duplicate the settings
across multiple units. However, ensure that you edit the file to remove any unit-specific
SIP account settings before applying the file to other units.
Reset Configuration
To reset the phone to its default configuration:
Under Reset Configuration, click Reset.
Temporis IP150 Administration and Provisioning Guide ed 0.1 73/106