Tempori_22_uk.qxd 29/05/01 17:05 Page 2 1. SETUP Plug one end of the spiral cord into the handset plug (A), and the other end into the socket located on the left-hand side of the phone (B). Plug the telephone cord into the socket (C) situated on the back of the set and plug the other end (D) into the telephone wall socket.
Stick the phone number label there Peg for wall mounting 10 memories Message waiting lamp Memories and set programming Loudspeaker Redial/Pause Mute key Additional services access key Loudspeaker key * Loudspeaker and ringer * sound level adjustment * on TEMPORIS 22 only...
Go off hook. Press the Programming key twice. Press the Last Number Redial key. 3.7 ADDITIONAL SERVICES KEYS Function keys allowing access to additional services. (Ask at your local Telecom company or your fitter for information). * On TEMPORIS 22 only...
Modification of the ringer can be carried out during a ringing phase. Press one of the keys 1, 2, 3 or 4 to change the melody. To reduce or increase ringing volume, press on TEMPORIS 22 or press on TEMPORIS 12.
Page 6
To adjust the ringing: Press the Programming key then key 1 (current melody is heard). To reduce or increase ringing volume, press on TEMPORIS 22 or press on TEMPORIS 12. Pressing a key between 1 and 4 changes the melody.
Page 7
Tempori_22_uk.qxd 29/05/01 17:05 Page 7 6.4 IF YOU FORGOT THE PASSWORD Access the programming mode again and then: Press the Programming key followed by 0. Press the key. BEEP 2 beeps are generated. BEEP Go on hook. This last operation erases the WHOLE programming including memories.
According the disposition of the directive 1999/5/EC of the European parliament and of the council of 9 March 1999 on radio equipment and Telecommunications terminal equipment and the mutual recognition of their conformity. The certificate of conformity is available from the following Internet site: “www.atlinks.com”. Engineered by An ALCATEL/THOMSON multimedia...