Programmable Keys; Other Possible Programmable Key Settings - Alcatel Temporis IP150 Manual

The deskset external features that are relevant to installation and configuration are
described below.
RJ9 Corded headset input (on side)

Programmable Keys

The table below lists the default settings for the programmable keys. The key
assignments on your phone may be different. Some keys may be programmed as Quick
Dial keys, for example. To assign functions to programmable keys, see Programmable
Keys on page 39.
Key Number
1
2
3
4
5
6-14
15
16-20
* You can assign more than one key to a line. For example, you can configure keys 1 and
2 to access Line 1, and keys 3 and 4 to access Line 2. Label the keys appropriately for
deskset users after configuration.

Other possible programmable key settings

 Directory
 Call History
 Redial
 Messages
Temporis IP150 Administration and Provisioning Guide
Access F11 To F20
Press F5 to switch to the second possible value of a programmable key.
Note: This is the default setting. You can configure F5 to perform other
functions
Setting
Line 1*
Line 1
Quick dial
Quick dial
Access to F11-F20
Quick dial
Access to F11-F20
Quick dial
Programmable keys
Can be programmed to perform various functions or access
various features.
For example:
 Press to access a line to make a call
 Press to dial a monitored extension or a
quick-dial number
 Press to answer a ringing call on any line
or monitored extension
See also Programmable Keys on page 7.
Directory card
To write names on the directory card, pull out the directory card
from under the plastic cover.
ed 0.1 7/106