Alcatel Temporis IP150 Manual page 27

Audio Settings
Setting
Ringer Tone
user_pref.line.x.ringer
Codec Priority 1
sip_account.x.codec_priority.1
Codec priority 2
sip_account.x.codec_priority.2
Codec priority 3
sip_account.x.codec_priority.3
Codec priority 4
sip_account.x.codec_priority.4
Codec priority 5
sip_account.x.codec_priority.5
Enable voice encryption (SRTP)
sip_account.x.voice_encryption_enable
Quality of Service
Setting
DSCP (voice)
sip_account.x.voice_dscp
DSCP (signalling)
sip_account.x.signaling_dscp
Signaling Settings
Setting
Local SIP port
sip_account.x.local_sip_port
Temporis IP150 Administration and Provisioning Guide
Description
Sets the ringer tone for
incoming calls on the
account.
Select the codec to be used
first during a call.
Select the codec to be used
second during a call in the
event near-end and far-end
cannot negotiate the first
codec.
Select the codec to be used
third during a call if previous
codecs fail.
Select the codec to be used
fourth during a call if previous
codecs fail.
Select the codec to be used
fifth during a call if previous
codecs fail.
Select to enable secure RTP
for voice packets.
Description
Enter the Differentiated Services Code
Point (DSCP) value from the Quality of
Service setting on your router or switch.
A 6-bit value is supported.
Enter the Differentiated Services Code
Point (DSCP) value from the Quality of
Service setting on your router or switch.
A 6-bit value is supported.
Description
Range
Tone 1–10
G.711a,
G.711u, G.729,
G.726, G.722
None, G.711a,
G.711u, G.729,
G.726, G.722
None, G.711a,
G.711u, G.729,
G.726, G.722
None, G.711a,
G.711u, G.729,
G.726, G.722
None, G.711a,
G.711u, G.729,
G.726, G.722
0: disable
1: enable
Range
0-63
0-63
Range
0–65535
ed 0.1 27/106
Default
Tone 1
G.711u
G.711a
G.729
G.726
G.722
0
Default
46
26
Default
5060