Alcatel Temporis IP150 Manual page 75

User Password
Setting
User password: Enter old
password
User password: Enter new
password
User password: Re-enter old
password
profile.user.password
To change the User password:
1. Enter the old password (for a new phone, the default password is user).
2. Enter and re-enter a new password. The password is case sensitive and can consist of
both numbers and letters.
3. Click Save.
Web Server Settings
Setting
HTTP Server port
web.http_port
Enable Secure Browsing
web.https_enable
HTTPS Server port
web.https_port
To configure Web Server Settings:
1. Enter the HTTP Server port number. The default setting is 80.
2. Enable or Disable Secure Browsing. When enabled, the HTTPS protocol is used, and
you must select the HTTPS server port in the next step.
3. Enter the HTTPS server port number. The default setting is 443.
Temporis IP150 Administration and Provisioning Guide
Description
Enter user password.
The password is case
sensitive and can consist of
both numbers and letters.
Description
Sets the port where the embedded HTTP
server is accessible
Sets the server to use the HTTPS
protocol.
Port used by the embedded HTTPS
server.
Range Default
String user
Range
0–65535
1: Enabled
0: Disabled
0–65535
ed 0.1 75/106
Default
80
0
443