Deleting Programs; Importing A Program; Software Update; Update - TechniSat DigiCorder K2 Operating Manual

49773_DigiCorder_K2_EN.qxd

9.5.3 Deleting programs

In this step you can Delete programs that are in your favourites lists, but are no longer being
broadcast.
> If you want to delete a displayed program that is no longer being broadcast, use the
green Continue control key to confirm.

9.5.3.1 Importing a program

Programmes that have just been added or those that are not saved in your complete list will
be displayed in the next step. You can now select, if the programs must be imported and sor-
ted or added to the end of the main favourites list. If you have switched on the multiple
favourites lists function as described in Section 6.4.1 and you want to add newly imported
programs to other favourites lists, you must import them into the respective favourites lists as
described in Section 9.1. You can also reject the displayed programs. In this case you just
have to import the programs into the complete list and not in the favourite lists.
Automatically importing a program
> Press the green Sort control key to automatically import the displayed programs
into the main favourite list.
The programs will then be added to the favourites list acording to fixed criteria.
Adding programs
> Press the yellow Addcontrol key to add all of the new programs to the end of the
list.
Reject channel (do not add)
> Press the red No control key, if you do not want to add the displayed programs to
the main favourites list.

9.5.4 Software update

Furthermore, you can also update your digital receiver's operating software by means of a
data channel.
> Use the up/down arrow keys to highlight the Update software line.
> Now press the OK key to jump to the Update software sub-menu.

9.5.4.1 Update

> Use the up/down arrow keys to highlight the Update line.
> Use the OK key to switch automatic software update to on.
This setting will ensure that your device will run an automatic update at the time that
you set, as soon as new operating software is available.

9.5.4.2 Update time

> Use the up/down arrow keys to highlight the Update time line.
> Set up the time at which the software update should be run in the Update time line
using the numeric keypad.
1.11.2007 14:57 Str. 65
65